Complete Buyers Guide For Choosing The Correct Garage Door Threshold

If you’re like most homeowners, you probably don’t think of your garage the same way you do the rest of your house. After all, when was the last time you vacuumed your garage floor, or dusted anything in it? Muddy shoes, wet dogs and leaky paint cans would all be tossed out of your living room within seconds. In the garage, however, it’s almost as if anything goes. Most of the time, the garage is the place where we change our car’s oil or hose off a pair of muddy boots — but that doesn’t mean that we shouldn’t pay attention to how well protected our garages are from the elements. Although garages can be a wet and dirty place, it’s still important to make sure that they’re kept as clean and dry as possible.

That’s because even though garages can get grungier than your dining room, they’re still vulnerable to damage from water, cold and other insidious elements from the outside. Water from rain or melting snow can seep into the garage underneath your garage door and cause damage and mold growth. It can get into tiny cracks in your garage floor and expand when it freezes in the winter, creating bigger cracks and serious damage to your foundation. The average cost of cleaning and fixing water damage for homeowners can be as much as $3,000. That means, a little water getting into your garage can become a big problem. Gaps in your garage door also can allow pests and vermin such as mice and insects to sneak in and take residence among your belongings, bringing with them filth and disease. A garage door that does not close completely also allows air heated or cooled by your HVAC system to escape, causing your air conditioner or furnace to work overtime. Ultimately, costing you money in the form of wasted energy.

For these reasons and many more, it’s important that homeowners understand how much a garage door threshold can help them prevent these issues. A properly selected and fitted garage door threshold seal can prevent flooding, infestations and wasted energy. Read the following guide for some tips on choosing the garage door threshold seal that’s right for your garage. The rules may be a little different when it comes to your garage, but that doesn’t mean you shouldn’t be as concerned about protecting it as you are for the rest of your home.

Author Bio:  Ashley W. Smith is Managing Director for Garadry. Smith formed the company in 2009 and launched the Garadry website in 2015 to meet the needs of the growing consumer base in the U.S. Garadry designs its own range of innovative weather seal products for anybody with a garage/commercial door.

Choosing The Correct Garage Door Threshold created by Garadry

Tips For Maintaining Your Wooden Flooring

There aren’t many homes where wooden flooring would look out of place; they’re versatile, beautiful and can make even the smallest of rooms look larger. Keeping them in great condition, however, can be difficult if you don’t know what you’re doing. That’s where these tips come in, and if you follow them closely your wooden floors could double in life expectancy.

Pounce on spills as soon as they happen

wooden flooring

It’s impossible to just stop spillages from happening, so instead make sure you’re prepared for them and attack the spills as soon as they occur. Every second they go untreated, the wooden floor will absorb more and more of it and the finish will be dulled even further; if that spill dries up, then that will result in some long-term damage. A cloth or cotton mop is perfect for avoiding this.

Vacuum with care

Vacuuming is great to suck up deep resting dirt that brushes or cloths wouldn’t normally get, but if used incorrectly, they can do more bad than good. The beater bar (also known as a bristle bar) is the rotating brush section at the bottom of some vacuums that can rotate thousands of times per minute. This is ideal for a carpet, as it can be very effective at dragging up dirt.

However, for a wooden floor, it can rapidly dull the woods finish and take months off its life span. Instead, either use a vacuum without a beater bar or switch the mode to Hard Floor, if that is an option available to you.

Use mats at entrances

floor mat

Think about everything that could be on the pavement outside your home; glass, faeces, hard stones, so on. These can all get captured in the grooves of your shoes, and dragged into your home. Grass and mud might be a nuisance to clean up, but stones and glass could cause some serious damage to your wooden floor. To cut this down, tough mats at the entrances to your home and rooms are perfect for collecting this dirt and debris.

Better yet, you could take a page out of Asian culture and remove your shoes as you enter. While mats are effective, it doesn’t get more effective than taking your shoes off completely.

Follow the grain

To keep your wooden floors looking as good as possible for as long as possible, we also recommend following the grain of the wood when you clean. Sweeps and strokes going in the same direction of the wood means you won’t disrupt the grain too much, and the protective layer will be kept intact for longer.

Keep that mop (relatively) dry

A very common mistake when it comes to cleaning wood floors is using too much water. It might sound counter-intuitive, but your mop should be almost dry when you use it and only slightly damp at the touch. Similar to the first tip that mentioned how bad spills were for your wood, too much water means the wood will absorb some of it; which can lead to the warping of the wood or a ruined finish.

Let us know in the comments below if you have any other tips for looking after wooden floors!

Author bio: Criterion Flooring are wood flooring experts who specialize in the restoration and installation of wood floors. They also supply and install Oak, Bordeaux, Laminate and Alternative Floors.

Pre-Autumn Updates: 5 Things to Check on Your House Before Summer Ends

Pre-Autumn Updates: 5 Things to Check on Your House Before Summer Ends

The steps that you take in the coming weeks could have a major impact on your family’s comfort once the weather cools off. Seasonal maintenance will also help you cut back on your energy bills and save a little extra money every month when you start using your furnace or boiler again. Here is a look at five areas of your home you should take a look at well before the summer ends.

Check on Your Furnace or Boiler 

Most newer furnaces and boilers are designed to last for well over a decade, but they still require constant maintenance. When your HVAC system is being used regularly, you might need to change the filters as often as once every month. Homeowners should also have their heating and cooling systems inspected by an HVAC contractor twice a year.

Seal Cracks and Openings

Keeping your home at a consistent temperature is going to be nearly impossible if you have openings around doors, windows, vents, and pipes. Even with high-quality insulation and a new HVAC system, small openings will allow quite a bit of warm air to escape from your home during the winter months. Most smaller openings can easily be sealed with a caulking gun and all-purpose caulking.

Inspect the Roof for Damage

Your roof, rain gutters, and downspouts should never have any cracks or clogs. A minor pinhole or clog could cause thousands of dollars in damage during a rainstorm, and your home insurance might not cover the repairs. If you are unsure of how to inspect your roof for damage, then you should schedule a service call with a local roofing contractor like Gutter Magician NKY or someone else who has gutter service options.

Protect the Pipes

Any water pipes that are exposed to cold temperatures could burst when the weather begins to change. All of the pipes inside your home should be checked for leaks and wrapped in foam pipe covers before the start of autumn. You also need to close the shutoff valve that controls your outdoor faucets and remove the bleeder caps to drain any remaining water.

Upgrade the Insulation

High-quality insulation will keep your home at a comfortable and consistent temperature no matter what the weather is like outside. At the very least, you need to check your insulation a few times a year for any signs of damage. Homeowners who have a little extra money to invest back into their property should consider upgrading to blown-in insulation with a high R-value.

Another project that you might want to tackle this summer is scheduling a comprehensive energy audit for your home. During an audit, a specialist will inspect your property and come up with a detailed list of changes you can make to improve your home’s efficiency.

Kara Masterson is a freelance writer from Utah. She enjoys Tennis and spending time with her family.

 

How To Clean Your Retractable Shade Awnings

Many people forget to care for their retractable awning once it’s installed and keep using it every day and for months and years till one day they realize that multiple problems have developed with the uncared for awning. The awning may stop rolling in or out smoothly, or may develop mildew and fungi, or may have too coarse and thick covering of dust on it to make it frizzy, etc. Most of these problems can be avoided easily with a little maintenance and periodic cleaning. A clean and well-maintained outdoor retractable awning would last for many years. Here are some expert tips and steps to clean your outdoor awnings.

awning
Retractable Shade Awnings

  • Steps for general cleaning

A general cleaning is advised every month to keep the awning in good health. This just needs a broom and a water hose.

  1. Clean the awning fabric outside and inside with a broom
  2. Now clean the awning with a jet of water and use only cold water
  3. Allow the fabric to air dry completely before you retract it

This cleaning is required once a month, and without any serious steps, the awning will keep looking nice and shining with this much care. However, you need to clean the retractable shade awning once in 2 to 3 years with soap water.

  • Soap water cleaning steps

To clean the awning with soap water, use only mild soaps, and avoid the use of harsh chemical and detergents. Also, use only cold water for this.

  1. Use a broom to clean the fabric outside and inside very well.
  2. Now with a hose of cold water, wet the fabric.
  3. Make soap water solution, and then sprinkle the solution on fabric and gentle rinse in patches with a soft brush. Start from the bottom and move upwards.
  4. Now leave the soap water and give some time for the soap to work, as it loosens the dirt.
  5. Now rinse off the soap with cold water.
  6. Allow the fabric to air dry completely
  7. Retract it

All types of dirt and stains can be removed from outdoor awnings when you use the right cleaner for the problem. Oil stains, paint stains, bird droppings, mold and mildew, rust stains, and everything will be gone with the right cleaner.

  • Facts you must know to keep the awning good

Besides cleaning the awning periodically, there are some words of caution, which you must know and follow. They are:

  1. Shrubs and vines, which twine around the awning or touch it, may contain chemicals and acids, which will slowly corrode the fabric and the metal bar. Hence, you should try to keep such elements away from the awning and prune shrubs and vines nearby.
  2. Never retract an awning while the fabric is still wet. This way the fabric will develop molds and mildew on it, and eventually smell awfully bad, and freeze while rolling on or out.
  3. The awning frame is made of aluminum like metal, which does not demand much cleaning etc. Hence, you may loosely broom it in a month and forget.
  4. Never wet the motor part of the awning. Wetting the framework or the motor will bring trouble.
  • Outdoor retractable awnings need little and general care mostly

Generally, retractable shade awnings are made of stain and mold resistant fabrics, which are treated accordingly to show such characteristic. However, when too much of dirt builds up, then molds may grow not directly on the fabric, but on the dirt clumps. Hence, a periodic cleaning ensues that you won’t face challenge while retracting the awning or rolling it out. It will look fresh and stay as it is for longer period of time.

How to Maintain Metal Surfaces in Your Yard

Since the early times, people have praised metal for properties they couldn’t get from natural materials. But actually, metal is much closer to nature than many people think. The iron ore comes from the depths of the earth, so it shouldn’t come as a surprise that metal feels in our gardens like at home. Still, as a man-made material, metal is more susceptible to elements than other materials used in landscaping. Its arch-nemesis is rust – so homeowners need to intervene from time to time to keep metal features like fences, furniture, posts, taps, gates, rails, and grates in a mint condition.

How to Maintain Metal Surfaces in Your Yard

Coating vs. painting

Rainfall and unsteady temperature always conspire to chip away the metal coating. Once the protective layer is damaged, rust is never far behind. One way to avoid it is to choose the most suitable metal for the intended use. Products with baked-on enamel or powder-coated surfaces will last long, without any special maintenance. On the other hand, varnished metal or surfaces protected with regular paint are prone to peeling, flaking, and chipping. Metals with superior coatings are expensive, but their longevity definitely justifies the initial cost.

Debris attracts moisture

With its intricate details, metal patio furniture is particularly exposed to a risk of decay. However, a few simple routines can make it last many years. The first defence against rust is cleanliness. At least twice a year, let’s say in spring and autumn, give your patio set a good scrub. Stir some liquid detergent in a bucket of warm water and use a sponge to remove dust and debris that attract moisture. Use an old toothbrush to reach hidden areas. When you are done, rinse away the detergent with a garden hose and leave the pieces to air-dry in the sun.

Physical protection

As mentioned above, it is the coating that safeguards metal from rusting. Careless handling can make two metal surfaces clink and cause chipping on one or both pieces. Whenever you need to move metal furniture, lift the pieces from the ground instead of dragging them. When the time comes to pack your outdoor furniture inside, make sure you protect the pieces with old towels or bed sheets to prevent them from scraping against each other.

How to Maintain Metal Surfaces in Your Yard

Quick and effective solution

Still, even if you take all precautions, no one can guarantee that rust won’t develop over time. Although seemingly a small problem at first, it can get more serious if left unattended. Once you spot a small patch of rust, clean the area as described above and stop the corrosion in its tracks by using a quality rust converter. These products interact with iron oxide, converting it into an adherent black layer that is moisture-resistant and provides an excellent surface for latex and enamel paints.

Highly damaged surfaces

In cases of more extensive damage and negligence, you may need to refinish the metal – a task that demands more time and effort. Before you can start refinishing, you need to get to the bare metal surface. Using a wire brush or a special wire wheel drill attachment, scrape away the old coating. Take care not to damage crevices and folds that may be a part of the design. After you have removed the coating, wipe down the dust with a damp cloth and let everything dry before you apply the primer and metal paint.

The majority of homeowners regularly tend to their lawns and shrubs, trimming and clipping to add appeal to their gardens, but only a few pay the same attention to metal elements in their yards. With rust, prevention is the best protection, but when the surface layer is already damaged, quality anti-corrosion products can save the day.

 

 

 

Is Your Home Ready for Fall? 4 Things You Must Do Before the Season Changes

Is Your Home Ready for Fall 4 Things You Must Do Before the Season Changes

Fall is a time when the leaves change color, football is back on television and the temperatures start to cool off. This is a good time to inspect your home and make sure that it is ready for the cooler and wetter weather typical of fall and beyond. Let’s look at some items that you should check before summer ends.

Check for Nests of Any Kind

While there may not be any wasps or bees flying around this late in the year, it is a good idea to check for nests. If you see any, it is a good idea to knock them down as it increases the odds that they don’t come back next year. You should also spray for bees, ants and any other pest that may try to make a home in your home.

Organize and Clean the Garage and Shed

As the weather gets colder and wetter, dirt can easily turn into mud that gets tracked into your house. If you have old grass clippings or other debris in the garage or shed, it can turn into sludge or otherwise decompose, which can lead to a nasty smell. It may also attract insects looking for an easy meal. If you own a lawn mower, make sure to clean it and store the gas securely before putting it away for the fall and winter.

Have Your Roof Inspected

Even a slight amount of water damage can wreak havoc on your home. In many cases, water leaks from the roof and flows throughout the entire home. Inspecting your roof and having it worked on by a professional, such as one from Berwald Roofing Inc, can prevent water damage from becoming a major issue. It can also prevent damage caused by insects and exposed roof decking.

Get the Furnace Inspected Too

The summer months are the perfect time to have your furnace inspected because demand will be low. This means that you can get someone to look at it in a timely manner and for a lower price. Many contractors offer service packages that provide seasonal inspections for a flat fee, and repairs may also be covered with a service package.

The fall season is considered to be a transitional one. While it won’t be cold and snowy for another couple of months, you know that winter is coming sooner rather than later. Therefore, now is the best time to get your home ready for the changing weather conditions. If you aren’t up to doing this work yourself, don’t hesitate to call a professional as soon as possible.

What Chemicals are Needed for Normal Hot Tub Operation?

What Chemicals are Needed for Normal Hot Tub Operation?

Having a hot tub at home means that you can relax and unwind in the warm water any time you want to. A hot tub is ideal for relaxing alone or with your partner. In order to keep the hot tub functioning safely and effectively, be sure to use the right chemicals for its optimal operation.

Chlorine

Chlorine has long been the chemical of choice for keeping a hot tub’s water clean. Chlorine is a potent sanitizer. The substance has a familiar smell that reminds most people of swimming pools. It comes in granules and tablets. You should not use the same chlorine for a swimming pool for your hot tub. A hot tub requires a different concentration of chlorine. Be sure to follow the manufacturer’s recommendations for the concentration, amount and frequency of chlorine to add to the water in your hot tub.

Bromine

Bromine is an element that is similar to chlorine. It is one of many chemicals for your spa that keep it in operating condition, and safe for you to enjoy. It could be used as an alternative to pure chlorine in a hot tub. In most bromine preparations, the substance is a mixture of sodium bromide and chlorine. The bromine comes in tablet form and is applied through a floating feeder to the hot tub’s water. When used in a hot tub, the bromine does not have as strong of a smell as chlorine. This makes it a good choice for hot tubs that are located inside of the home.

Select the Best Spa Chemicals for Your Hot Tub

It is wise to select the best spa chemicals for hot tubs. Spa chemicals for hot tubs are designed to protect the filters, heaters and other mechanical parts of the hot tub. They are also safe for use indoors. Choosing the right spa chemicals for your hot tub also helps to promote your health. Because you immerse your body into the hot tub, it is important that the water is clean and free of germs that could cause you to become ill.

Mineral Purifiers

Mineral purifiers may allow you to cut down on the amount of chlorine or bromine that are needed in order to keep the water of the hot tub clean. Most mineral purifiers are applied to the hot tub’s water filter. They can also be used in a floating device that stays in the main part of the hot tub. These sanitizing minerals are released into the hot tub’s water over a long duration of time. The purifiers work to remove impurities such as salts and calcium from the water. They also help the filter to capture more bacteria, skin cells and hair from the water. Mineral purifiers might not be recommended for use in all hot tubs or with all water types.

Ozone

Ozone is a chemical that can offset the amount of chlorine or bromine that is needed to keep your hot tub’s water sanitary. It can only work if your hot tub already has a machine that is equipped to handle the ozone and release it into the water. Ozone works by inhibiting the growth of bacteria. A low level of chlorine or bromine is still needed in order to keep the hot tub clean and free of contaminants. If a hot tub does not already have the machine needed for inserting ozone into the water, it might not be a good idea to retrofit the tub.

These chemicals help to keep the water in your hot tub safe for use on your skin. Be sure to use the right amount of chemicals for the size of your hot tub. Remember that you will still need to completely empty your hot tub every couple of months in order to keep it safe.

Carport Crisis: How to Repair 4 Common Garage Issues

Carport Crisis How to Repair 4 Common Garage Issues

You expect that your garage door will open and close every time you push the button on the remote or manually raise or lower the door. You rely on proper operation of the garage door to keep your vehicles and family safe form the elements or intruders. Garage doors and their mechanisms do sometimes fail, which is why routine maintenance of all components is important. Follow these tips about some of the issues that can arise and what to do about them.

Check for Broken Springs

One of the most common garage door issues is a broken spring. There are usually two springs that commonly sit above the head of the door. The springs are under torsion and enable the weight of the door to be lifted more easily. If you find yourself needing to get the car out of the garage, say to go to work, and you experience a broken spring, follow these suggestions. First, unplug your garage door opener and then disconnect the emergency release cord above the door. Now you can lift the door. Keep in mind that it will be heavy. Take your car out of the garage and close the door.

Unless you are very handy, this is the time to call a professional garage door repair company, such as Georgia Garage Doors Inc., that can safely replace the broken spring. The technician will measure the spring, replace it in kind, and hook everything back up so that the door will operate easily.

Inspect Tracks, Guides, Chains, and Belts

Your garage door might be opening and closing unevenly or more slowly than normal. This could be due to the tracks, guides, and chains being corroded or rusty. The overhead belt could also be deteriorating. Fasteners might have become loose and are impeding the movement. You can do a manual inspection of these using a flashlight and a step ladder. Tighten any loose screws, clean the rust, and, lubricate the tracks.

Look for Failed Seals

A very important component of garage door systems is the perimeter weatherstripping. These seals prevent rain, wind, debris, insects, and small animals from getting inside the garage. You can find the weatherstripping around the outside perimeter of the door frame and on the bottom of the door itself. Some doors have gaskets on the sides as well. Inspect for gaps, holes, and deterioration. Seals can be replaced quickly and economically.

Operate Openers, Remotes, and Sensors

The electrical components of a garage door system are subject to malfunctions. The first thing to go is simply the light bulb in the opener. That you can easily remedy by replacing the bulb. The remote can stop working. This is usually an easy fix by replacing the battery. If the motor in the opener stops working, check the circuit breaker first. If that has not tripped, it is likely the opener needs to be replaced. Make sure you check to see if it is still under warranty before you call your garage door repair company. Also check the safety sensors from time to time. These are what prevent the door from closing all the way if something is blocking the opening, such as a skateboard that has rolled into its way..

Maintaining your garage doors and all the related components is good practice to extend their usefulness. This may also save you money for unanticipated emergency repairs. It is a good idea to schedule a routine maintenance check of your door systems with your local garage door repair professional.

A Simple Guide to Successfully Inspecting Your Own Home

A Simple Guide to Successfully Inspecting Your Own Home

Being proactive is a good policy in general. It’s especially important in home maintenance. Performing regular maintenance and catching minor repairs before they become major can keep your home and its systems in optimum condition.

How often should inspections be done? Most home repair experts suggest every six months. A Spring inspection can catch any damage done by cold and winter storms. An early Fall inspection can make sure that heat or open doors and windows haven’t done any damage. In addition, of course, frequent inspection causes any normal wear and tear that needs to be addressed.

Here’s a simple guide to home inspection.

      1.  Heating and Cooling Systems

Your heating, ventilation and cooling (HVAC) systems can be checked by careful examination of components.

First, look at the air filters. They should be cleaned or replaced regularly. If they are dusty and dirty, they definitely need to be replaced. Your system will not run at peak performance if the filters are dirty.

Second, look at your air ducts. Do you see any duct tape? Is it in good condition, or peeling and drooping? Replace it if so. Any dirt or dents can indicate problems. Look for any torn or collapsing sections if you have flexible ducts.

Third, turn on your furnace and eyeball the flames. It should be a steady blue. If you see yellow or orange flames that flicker, there may be issues with its combustion. Call a professional to resolve.

Fourth, thermostats need to be cleaned. Take the outer covering off and clean any dirt and dust with cloths or Q-tips.

If your air conditioner compressors are outside, check to see that shrubs or vines (or trees!) haven’t grown over them. If they have, they need to be cut off or they can severely impair the life and function of the unit. Make sure shrubs, vines and trees are pruned. If this looks as if it will be a chronic problem, it’s a good idea to move the landscaping to a different place.

     2.  The Water System

Check every water faucet for signs of leaks and signs of rust. Leakage can cost you in lost water, but they also lead to bigger leaks. Have them fixed at the first sign of leakage.

If you have rust or signs of rust from leaking water, such as reddish stains, have a professional inspect the pipes.

Basement converted to a gym, White Plains, NY

     3.  Attics and Basements

Attics and basements can both be subject to water damage, either from minor flooding or saturated ground in basements or roof leakage in attics. Most of this inspection can be done by carefully eyeballing your attic and basement. Do you see any sign of water damage to stored boxes, for example? Check any wood for signs of rot or water by poking with a screwdriver. Look for signs of mildew. If you see any signs that water leakage is a problem, call a professional who can find and fix the source.

Check your basement and attic for signs of pests as well. Mice, termites, ants and other pests can enter your home by crawling in from the ground through areas in the basement, or from the roof to the attic. Termites leave termite tubes, ants leave trails and mice will chew almost anything. If your insulation or stored camping food has been chewed, you may have mice.

    4.  Roofs

Roofs can lose shingles due to age or winter weather. Other materials can degrade due to the same factors. You also want to make sure that, whatever the composition of your roof, you don’t have birds or other animals nesting on it. They can cause damage that will cost you plenty to repair if the creatures aren’t proactively removed.

Inspect your roof carefully for signs of wear and tear. Roofs in the natural course of events will need to be replaced every 20 to 30 years, so be sure to keep them well maintained to ensure maximum long life.

     5.  Foundations

Look at the foundation for signs of cracks. Hairline cracks are normal, but if they become larger, it’s wise to keep an eye on them. Keep a notebook and note the size of any cracks. If they become noticeably larger at the next inspection period, call a professional for a thorough inspection.

decks and patios

     6.  Decks and Patios

Examine your deck or patio for any sign of wear and tear. Harsh weather may cause damage to either. Both decks and patios, of course, will require maintenance as time goes on. Do you need to remove any vegetation growing around or through cracks in the patio? Does your patio or deck need power washing or a sealant to look its best? Both should be part of regular maintenance. If they have not been, it may be time to institute them every six months.

     7.  Paint

The exterior of a home will need to be painted roughly every ten years. While not strictly speaking a repair, faded or peeling paint can expose your home’s materials to the elements more than if the paint were in good repair. Look at your home’s exterior with a stranger’s eye. Does it look fresh and appealing? If not, it’s time for a new paint job.

Maintaining your home well ensures that minor repairs remain minor, both in cost and in effort needed to fix them. Routine home inspections will ensure that you find any repairs that need to be made.

Author Bio:

Kacey MyaKacey is a lifestyle blogger for The Drifter Collective, an eclectic lifestyle blog that expresses various forms of style through the influence of culture and the world around us. Kacey graduated with a degree in Communications while working for a lifestyle magazine. She has been able to fully embrace herself with the knowledge of nature, the power of exploring other locations and cultures, all while portraying her love for the world around her through her visually pleasing, culturally embracing and inspiring posts.

https://twitter.com/kacey_mya

https://www.pinterest.com/kaceymya/

https://www.instagram.com/thedriftercollective/

How to Keep Rodents and Other Pests out of Your Home for Good

How to Keep Rodents and Other Pests out of Your Home for Good

If you own a home, you know how hard it can be to keep rodents and other pests out of your home, especially in certain weather conditions, such as rainstorms and cold temperatures. Though it’s impossible to totally keep pests out of your home, there are some things you can do to greatly reduce the chances that the invaders will find their way inside.

Seal up Entryways

One of the best ways to keep pests out of your home is to take away the places they use to get inside. This means you need to go over your house with a fine-toothed comb to find every little crack, slit, crevice, and hole. Start by checking around your doors, windows and utility boxes and caulk or weather strip any gaps. You also want to seal any foundation cracks or cracks in your basement floor. If you have a fireplace, have it inspected to make sure critters aren’t already using it, and have it sealed if needed. You also should check your roof vents and look in your attic to find any possible means of entry.

Don’t Invite Them In

Pests are attracted to food, so you need to make sure you are not leaving uncovered or opened food out on your counters and shelves. You also want to make sure that you are not leaving pet food or water outside for long periods of time. And, of course, you want to make sure that any trash you throw away outside is in sealed bags and that the trash can lid is firmly secured.

Take Away Their Shelter

Pests are always looking for a place to live, so you don’t want to attract them to your home by giving them one. Some companies, like American Pest Control Inc., know that keeping trees and shrubs trimmed back away from your home and cleaning up piles of branches or debris around your yard can also help. If you have a deck, don’t store anything under it that might provide a hideout.

Use Pest Treatments

In addition to all the other measures mentioned, it’s still a good idea to treat for pests to help keep them out. You can use commercial products that you can buy on your own, but if those don’t work, it’s worth it to call a pest control service.

Pests are a nuisance and can be a health hazard. Following these tips will help to keep them out of your home and keep you and your family safe.

Copyright © 2017 | Bruzzese Home Improvements | All Right Reserved | Web Design & Development by QualityMust